Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Studio City
Roof replacement in Studio City costs between $14,000 and $38,000 for a typical single-family home, depending on hillside vs. valley-floor location, fire-rating requirements, and material choice. Most Studio City re-roofs take 3 to 7 working days once permits clear. We know the difference between a 91604 hillside roof and a 91614 valley bungalow because we’ve torn off and rebuilt both, many times. If your roof is failing and you need a straight answer on scope and price, call (866) 217-3967 for a free estimate. Ruben Ibarra runs our crews and can walk you through what your roof actually needs.
Why Moreno Valley Roof Repair Is Studio City’s Preferred Roof Replacement Company
We’re not a single-brand shop trying to sell you whatever shingle we happen to stock. Moreno Valley Roof Repair installs and supplies materials from seven manufacturers – GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. That matters in Studio City because the right material for a steep hillside off Laurel Canyon Blvd is often not the right material for a 1930s Spanish Colonial bungalow on the flat grid. We’ll tell you the real difference between Atlas and GAF, between a Class A rated assembly and a standard valley-floor roof, and we won’t push you toward the most expensive option unless your situation actually calls for it.
We also offer Roof Replacement as one of three core services alongside repair and inspection. That means a Studio City homeowner can start with a standalone roof inspection to find out what’s actually failing before committing to a full tear-off. No obligation to buy anything. Know what your roof needs before spending a dollar. When replacement is the right call, we handle the full scope: decking, underlayment, flashing, venting, and finish material.
Styles & brands we work with
Asphalt Shingle Roof Replacement in Studio City
Asphalt Shingle Roof Replacement in Studio City typically runs $14,000 to $26,000 on valley-floor homes and $22,000 to $38,000 on hillside properties with steeper pitches and fire-rating requirements. The range reflects decking condition, number of roof planes, and whether the home falls in the high fire-severity zone south of Ventura Blvd. Studio City’s intense summer sun degrades asphalt shingle surfaces and underlayment faster than coastal neighborhoods, so we check granule loss and membrane brittleness before recommending a shingle-only replacement versus a full re-deck.
Valley-Floor Standard Assemblies
On Studio City’s flat-grid bungalows and ranch homes north of Ventura Blvd, most re-roofs are straightforward tear-offs to decking, new underlayment, and architectural or composition shingle installation. Homes here are generally one or two stories with moderate pitches, which keeps labor and access costs predictable. The main variable is decking condition – many of these 1920s to 1950s homes have original wood decking that needs partial replacement once we open the roof.
Hillside Fire-Rated Assemblies
South of Ventura Blvd, where the canyon-edge homes back up against the Santa Monica Mountains foothills, a shingle replacement often requires Class A fire-rated materials and ember-resistant attic venting. The added cost is not optional – it’s code in the wildland-urban-interface zone. We scope those requirements before quoting so the price you get is the price you pay.
New Roof Installation in Studio City
New Roof Installation in Studio City – whether on a new build, an addition, or a full tear-down and re-roof – runs $18,000 to $42,000 for most residential properties. The spread is wider than a simple re-roof because new construction involves more engineering, steeper multi-plane layouts on hillside lots, and often more material waste from complex cuts and valleys. If you’re building in the hills or adding a second story to a valley bungalow, the roof is not a place to guess.
New Construction on Hillside Lots
Hillside new builds in Studio City mean steep pitches, large overhangs, and often multiple roof planes that tie together at awkward angles. We run ice and water shield through every transition and valley, because winter storms drive rain sideways into those intersections. The gutter and flashing plan matters as much as the shingle itself on a canyon-edge property.
Additions and Full Re-Roofs on Valley Homes
For additions on valley-floor Studio City homes, we tie the new roof into the existing structure without leaving a seam that becomes a leak point later. If the existing roof is nearing end of life, a full new roof across the whole structure is usually cheaper per square foot than doing the addition roof now and the original roof two years later. We’ll show you the math either way before you decide.
Trusted Brands We Service in Studio City
We install and supply Atlas, Tamko, GAF, and four other major manufacturers, so Studio City homeowners get a genuine material choice rather than whichever brand a single-brand contractor pushes. Whether you’re comparing Atlas Pinnacle versus GAF Timberline, or weighing Tamko’s value tier against premium architectural lines, we’ll explain the tradeoffs in plain language: warranty length, wind rating, impact resistance, and how each holds up under Studio City’s UV load. Because we’re not locked into one manufacturer’s program, the recommendation follows your budget and your roof’s exposure – not the other way around.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Studio City Homes
- UV-baked underlayment on hillside planes. South-facing steep roofs off Laurel Canyon and Coldwater Canyon Ave cook the membrane under tile or shingles years before the surface looks bad. By the time you see a leak, the underlayment is often brittle and cracked throughout.
- Wind-driven rain intrusion at valleys and overhangs. Those mid-century moderns with deep canyon-edge overhangs channel water into complex valleys. During Santa Ana and winter storm events, wind pushes rain sideways into flashing transitions that looked fine in summer.
- Non-fire-rated assemblies in the WUI zone. If your Studio City home sits south of Ventura Blvd in the high fire-severity zone, a standard composition roof that’s perfectly adequate for a valley-floor neighbor will fail code on your hillside. Ember-resistant attic venting is mandatory, and we see older homes that never had it.
- Rotted decking on pre-1950 valley bungalows. The older Spanish Colonial and Tudor stock north of the boulevard often has original 1×6 decking. Leaks that went unnoticed for years leave decking we can’t re-use. We inspect every sheet or board before we quote, so you don’t get a surprise change order mid-tear-off.
Pricing for Roof Replacement in Studio City, CA
On valley-floor Studio City homes, a full tear-off and re-roof with architectural asphalt shingles runs roughly $14,000 to $22,000 for a 1,600 to 2,200 square foot home. On hillside properties south of Ventura Blvd, expect $24,000 to $38,000 due to steep-pitch labor, complex multi-plane layouts, crane or material-haul access limits, and mandatory Class A fire-rated assemblies. Decking replacement adds $70 to $110 per sheet depending on the extent of rot. Tile or premium materials push costs higher. Call (866) 217-3967 and we’ll give you a written line-item quote based on your roof’s actual condition – estimates are free.
We Also Serve Cities Near Studio City
Moreno Valley Roof Repair handles roof replacement throughout the San Fernando Valley and surrounding areas, including Studio City, North Hollywood, Universal City, Sherman Oaks, and West Hollywood. If you’re nearby and your roof is showing age, the same crew and the same seven-brand material lineup applies. Call (866) 217-3967 to schedule a free estimate wherever your roof is.
Serving Studio City, CA — Our Local Coverage Area
We’re based in the Studio City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Studio City
If your home sits in the high fire-severity wildland-urban-interface zone south of Ventura Blvd, yes – Class A fire-rated materials and ember-resistant attic venting are required by code. Valley-floor homes north of the boulevard generally do not need the same rating. We check your property’s fire zone before quoting so you know exactly which requirement applies to your roof. Call (866) 217-3967 for a scope check and estimate.
Hillside roofs cost more because of steep-pitch labor, complex multi-plane layouts, material hauling and crane access, and the mandatory fire-rated assembly. The underlayment and flashing work is also more involved on homes with large overhangs and canyon-edge exposure. We scope all of that before quoting – you won’t get a generic square-foot price that turns into change orders once we tear off. Call (866) 217-3967 for a hillside-specific estimate.
We write a line-item quote based on square footage, pitch, number of planes, tear-off depth, decking condition, fire-rating requirements, and material choice from our seven-brand lineup. You’ll see exactly what each part of the job costs, and we’ll walk you through which line items are firm and which depend on what we find after tear-off. No vague allowances. Call (866) 217-3967 and Ruben can explain the quote structure before we even start.
Yes. Homes on exposed hillsides and ridgelines get shingles with higher wind ratings and we use more fasteners per shingle than valley-floor homes. Wind-driven rain is a bigger threat than sun for those properties, so flashing and underlayment get more attention on windward planes. We’ll specify the wind-rated product for your exposure and tell you why it matters. Call (866) 217-3967 for a wind exposure assessment.
First we check the decking condition – many 1920s to 1950s Studio City bungalows still have original 1×6 wood decking that may need partial replacement. We also check rafter spacing, sheathing thickness, and whether the roof’s slope matches current code for the material being installed. Ventilation in the attic is a common deficiency, and we inspect that too before quoting. Call (866) 217-3967 to schedule an inspection.
Written by Ruben Ibarra, Owner at Moreno Valley Roof Repair, serving Studio City and the San Fernando Valley.