Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Moreno Valley?
Metal roof installation in Moreno Valley typically runs $17,000 to $44,000 for a full tear-off and install on an average 1,800 to 2,500 sq ft single-story home, with most homeowners landing near $26,000. If you’re re-roofing over existing shingles, you’ll usually pay 15% to 25% less because you sidestep tear-off and disposal. The wide spread comes down to panel type, roof pitch, and how much prep the deck needs once we open it up.
We install metal roofing across Moreno Valley every week. Because we work with seven of the leading manufacturers, the number we quote reflects your roof’s actual needs, not a single brand we’re locked into. Below is a straight breakdown of what you’ll pay in 2026 and where the money goes.
Metal Roof Installation Cost Breakdown (2026)
These figures reflect the Moreno Valley market in 2026. A typical pitch (4:12 to 6:12) and standard residential home. Steeper or more complex roofs push toward the top of each range.
| Line Item | Typical Cost Range |
|---|---|
| Tear-off and disposal of old roofing | $1,400 – $3,200 |
| Metal panels and materials (standing seam or exposed fastener) | $9,000 – $24,000 |
| Underlayment and moisture barrier | $1,200 – $3,000 |
| Trim, flashings, and closures | $1,000 – $2,800 |
| Deck repair or replacement (as needed) | $600 – $4,500 |
| Labor and installation | $4,000 – $9,500 |
| Permits | $350 – $900 |
| Total range | $17,000 – $44,000 |
Per-Square and Per-Panel Pricing
Roofers price metal in “squares” (100 sq ft of roof surface). In Moreno Valley, exposed-fastener panels (often 3-ft wide corrugated or ribbed profiles) run $350 to $550 per square installed. Standing seam, which hides the fasteners and lasts longer, runs $600 to $1,000 per square installed. A typical 20-square roof lands around $7,000 for value-tier corrugated panels up to $20,000 for premium standing seam.
Panel width affects the count. Standard 3-ft panels cover a 36-inch span; some profiles come narrower and need more panels per square, which nudges the material line up. Screen the total by asking for a per-square number, not just a lump sum.
What Drives the Cost Up or Down
Two variables move the number most: panel type and roof complexity. Standing seam with concealed fasteners and a painted finish costs roughly 40% more than exposed-fastener panels but handles Moreno Valley’s intense sun and occasional wind events better over a 40-year span. Roof geometry matters just as much. A simple gable roof sheds water cleanly and installs fast. A cut-up roof with valleys, dormers, and multiple penetrations slows the crew and adds trim, and every penetration (vents, skylights, chimneys) needs a properly sealed flashing detail.
What Affects Metal Roof Installation Pricing in Moreno Valley
- Roof pitch and square footage. Steep roofs (8:12 or above) require more safety equipment and slower work, adding 15% to 25% to labor. A 1,200 sq ft footprint costs noticeably less than a 3,000 sq ft one, even on the same profile.
- Panel profile and gauge. 24-gauge standing seam sits at the top; 26-gauge and lighter exposed-fastener panels sit lower. Gauge affects both price and how the metal handles expansion on our hot afternoons.
- Deck condition. Much of Moreno Valley’s older housing stock was built through the 1980s and 1990s, and we regularly find soft or delaminated decking under aging shingles. Replacing bad sheathing runs $60 to $120 per sheet on top of the base quote.
- Inland heat and thermal movement. Temperatures here swing from cool winter mornings to triple-digit summer afternoons. That expansion and contraction means fasteners and panels need the right clips and spacing, and a cheap install that ignores this can loosen or oil-can within a few seasons.
- Clearance and access. Narrow side yards, pool fencing, and landscaping slow the material staging. Tight-lot homes near the newer tracts off the 60 freeway may carry a small access surcharge.
- Permits and inspection timing. Riverside County permitting and inspection scheduling add both cost and calendar time. Everything from a simple re-roof to a full system swap needs the permit pulled correctly before work starts.
How to Save on Metal Roof Installation
You can lower the number without cutting into the parts that keep the roof dry. A few moves that work in this market:
- Compare profiles honestly. Exposed-fastener panels aren’t a compromise if your budget drives the decision and your roof geometry is simple. We’ll explain where standing seam earns its premium and where corrugated panels do the job for less.
- Re-roof over existing shingles when the deck is sound. Skipping tear-off saves $1,400 to $3,200, but only if the old layers are within code limits and the deck is intact. We’ll check before recommending it.
- Bundle deck repair into the install. Fixing soft sheathing while the crew is already up there costs less than a return trip.
- Time the project away from storm season. Repairs spike after winter rains, and labor availability tightens. Booking in a dry stretch can shave the labor line.
- Choose a mid-tier brand intentionally. Between premium lines like GAF and CertainTeed and value-first options like IKO, Atlas, and Tamko, there’s real spread. The right call depends on your timeline, not the sticker.
Start with an inspection. Knowing what your roof actually needs before spending a dollar on repair or replacement keeps the final number honest. Free estimates are straightforward to arrange: call (866) 217-3967 and we’ll walk your roof and give you a written range.
How Does Metal Roof Material Choice Affect the Price?
Material sits at the heart of the cost. Here’s how the brands we stock compare on price and purpose, and why having seven of them matters:
- Premium lines (GAF, CertainTeed). Top of the price range, but you get longer warranties and proven finishes. Best when you plan to stay in the home and want the longest service life.
- Mid-range (Owens Corning, Tamko). A balanced middle ground on premium-tier performance and cost. Solid choice for most homeowners balancing budget and longevity.
- Value-first (IKO, Atlas). Lower entry cost without dropping to builder-grade. Often the right answer for budget-conscious owners or shorter holding plans.
- Boral. Offers specialized profiles and finishes. Useful when a specific look or design detail drives the decision.
Because we aren’t locked to one manufacturer’s program, our recommendation follows your climate, your home, and your timeline. We’ll tell you the real difference between, say, a GAF line and an Owens Corning line rather than steering you to whatever’s easiest for us to stock. That’s the honest version of “seven leading brands, one recommendation.”
Is a Metal Roof Worth the Cost in Moreno Valley?
Often yes, because the math changes over time. A metal roof typically lasts 40 to 70 years depending on profile, while asphalt shingles last 15 to 25. You pay more up front and avoid the mid-life replacement. Metal also reflects solar heat rather than soaking it up, which matters when summer afternoons push past 100°F in areas like Sunnymead Ranch and neighborhoods along the 60 corridor. A cooler attic means your air conditioning doesn’t work as hard.
Before any of that matters, confirm your roof is a good candidate. An inspection tells you whether a metal system makes sense or whether repair of the existing roof is the smarter spend right now. Repair when repair makes sense, replace when it doesn’t. You can see how a full metal system is scoped and installed on our Metal Roof Installation in Moreno Valley page.
Metal Roof vs. Shingle Replacement: Which Costs Less Over Time?
On day one, shingles win. A standard asphalt roof replacement in Moreno Valley runs $9,000 to $20,000, well under the metal range. But you’ll likely replace it once or twice over the life of a single metal roof, and each replacement carries installation cost, tear-off, and disposal. Add the energy savings from a reflective metal surface over 30 to 40 years and the totals close. If you’re re-roofing to sell soon, shingles may be the practical call; if you’re staying put, metal often earns out. We’ll lay out both sides with real numbers for your roof so you decide, not a salesman.
Why Installer Choice Changes What You Pay
Two quotes can differ by thousands for the same roof, and the gap isn’t just price. It shows up in panel gauge, fastener quality, flashing detail, and whether the crew handles expansion correctly. A worn-out cheap install costs more in the long run than a properly scoped one. Since we handle Roof Repair, Roof Replacement, and Roof Inspection under one contractor, you don’t have to shop multiple companies as your roof situation evolves. Single point of contact from inspection through final installation, continuity of knowledge throughout the project, and standalone inspections available with no obligation to buy anything. That’s how we keep the process honest from the first walk to the last panel.
We’re authorized to install and supply materials from all seven manufacturers we’ve named, and we reference brands like GAF and Boral as options, not obligations. Ready to get a written range for your roof? Start with our home page or call and we’ll set up your free estimate.
FAQs – Metal Roof Installation Cost
How much does a metal roof cost in Moreno Valley in 2026?
Expect $17,000 to $44,000 for a full tear-off and install on an average home, with most projects landing near $26,000. Re-roofing over existing shingles runs 15% to 25% less. Call (866) 217-3967 for an exact quote, free.
Is it cheaper to repair or replace a roof in Moreno Valley?
Repairs usually cost far less, often $300 to $2,500, so when the existing roof has life left, repair is the smarter spend. Replacement makes sense when the roof is near the end of its service life, badly damaged, or leaking in multiple spots. An inspection tells you which side you’re on. Call (866) 217-3967 to get an assessment.
How long does metal roof installation take?
A typical residential install takes 3 to 7 days depending on square footage, roof complexity, and weather. Larger or steeper roofs run longer. We’ll give you a realistic schedule with your estimate, and you can call (866) 217-3967 to talk through timing.
Does a metal roof increase home value in Moreno Valley?
In most cases, yes. Metal roofs are commonly valued for longevity and energy performance, and appraisers credit a newer, longer-lived roof. The exact bump varies by home, neighborhood, and local buyer demand. Call (866) 217-3967 and we’ll walk through your roof’s replacement-level value.
Can you install a metal roof over existing shingles?
Often yes, which saves $1,400 to $3,200 in tear-off and disposal. It requires the existing layers to be within code limits and the deck to be sound. We’ll confirm by inspecting the roof. To schedule, call (866) 217-3967 for a free estimate.
Metal roof pricing in Moreno Valley comes down to the panels you choose, the shape of your roof, and the condition we find under the shingles. Seven leading brands, one straightforward recommendation, and an honest number before any work starts. When you’re ready for a written range on your own roof, reach out for a free estimate.
Pricing reflects the Moreno Valley market as of 2026. Moreno Valley Roof Repair offers free estimates – call (866) 217-3967.
What Our Customers Say
"Leak over the kitchen turned out to be a cracked boot around a vent pipe, not the roof itself. He showed me the photo from up there and replaced the boot for a couple hundred dollars. The company before him had quoted a full tear off."
— Beatriz Torres"Quality work on the repair. There were a few nails left in the driveway that the magnet missed, so check yours before driving over it. Otherwise no complaints."
— Vivian Nguyen"Roof is solid and the price was competitive. The job ran a day over because of weather, which is nobody's fault, but I would have liked a call about it rather than noticing the crew hadn't shown up."
— Maria Vargas