Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Fullerton
A full roof replacement on a Fullerton home typically runs $9,800 to $24,500 depending on size, pitch, and what we find under the old shingles. That’s the honest range. What drives the price in Fullerton isn’t the square footage alone, it’s what’s hiding underneath: original skip-sheathing on pre-1950s downtown bungalows, WUI fire-code requirements on the hillside north of Chapman, and decades of Santa Ana UV on mid-century tract roofs. We’ve torn off enough Fullerton roofs to know that a bid built without looking at the deck is a guess, not a quote. Call (866) 217-3967 and we’ll give you a real assessment before any money changes hands.
Why Moreno Valley Roof Repair Is Fullerton’s Preferred Roof Replacement Company
Fullerton homeowners call us because we install what the house actually needs, not what a single-brand program pushes. We’re authorized to supply and install GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, which means when we recommend a material it’s because it fits your roof, your budget, and your fire-zone reality, not because it’s the only shingle in our warehouse. Ruben Ibarra built the company around one rule: repair when repair makes sense, replace when it doesn’t. That’s saved Fullerton customers a lot of money over the years.
We cover Fullerton from the downtown president-home districts up through the Raymond Hill ridgeline and out to the 92832, 92833, 92834, and 92835 ZIP codes. Our crews know the difference between a 1920s Craftsman on skip-sheathing and a 1960s tract home on plywood, and we scope the job accordingly before we start tearing off. Fullerton’s mix of housing stock means two houses on the same street can need completely different replacement strategies.
Every Fullerton replacement starts with the option of a standalone roof inspection. You get a straight answer about what’s failing, what can wait, and what the real price is. No obligation to buy anything. That transparency is why Fullerton homeowners keep our number.
Styles & brands we work with






Reroofing in Fullerton
Reroofing in Fullerton means tearing off the existing roof system down to bare decking, repairing or replacing that deck where needed, and installing a complete new system: underlayment, shingles or tile, flashing, vents, and drip edge. On a mid-century tract home east of Harbor where the plywood is still sound, a reroof is straightforward and typically runs $11,000 to $18,500. On a downtown bungalow with original wood shake, the same job often becomes a full redeck, pushing the price to $18,000 or more. We’ll tell you which one you’re looking at before we ever put a ladder against the house.
Decking and Skip-Sheathing Reality
Fullerton’s older homes, the 1910s through the 1930s Craftsman and Spanish Colonial bungalows around downtown and the college area, were built with skip-sheathing: spaced boards instead of solid plywood. Shake roofs could breathe on that. Modern shingles and fire-rated underlayments can’t. When we tear off on those houses, we almost always find the deck has to be sheeted over with new plywood before anything else goes down, which is why we scope it during inspection rather than surprising you mid-project.
Fire-Code Upgrades On Hillside Homes
The homes north of Chapman toward Coyote Hills and the Raymond Hill ridgeline fall inside Fullerton’s wildland-urban-interface zone. That means Chapter 7A requirements on re-roofs: Class A assemblies, ember-resistant vents, fire-rated underlayments. A flatland Orange County reroof doesn’t touch any of this. A Fullerton hillside reroof has to, and we’ve installed enough of them to get it right the first time.
Flat Roof Replacement in Fullerton
Flat roof replacement in Fullerton isn’t just a commercial job. Plenty of mid-century homes in the east and north tracts, plus additions and carports on older downtown properties, carry built-up, modified bitumen, or torch-down flat sections. These roofs fail differently than pitched shingle roofs in Fullerton’s hot, dry climate: UV breaks down the membrane surface, heat cycling opens seams, and Santa Ana winds peel back flashing at parapet walls and edge details. A typical flat roof replacement on a Fullerton home runs $7,500 to $15,000 depending on the system and the condition of the underlayment and insulation.
Hot-Dry Climate Stress On Flat Sections
Fullerton doesn’t get the marine layer that cools coastal Orange County. Our flat roofs sit under direct inland sun for ten hours a day in summer, with fall Santa Ana winds adding mechanical stress at every seam and penetration. What fails first is almost always the flashing: at scuppers, plumbing vents, HVAC curbs, and chimney bases. We replace those details with hot-dip galvanized metal and fully sealed transitions so the next roof doesn’t leak in the same place the old one did.
Replacement Versus Coating
Coating systems get sold hard in Orange County, but on a Fullerton flat roof with cracked seams or open flashing, coating is money spent delaying a tear-off, not avoiding one. We’ll give you the straight answer on whether your flat section has life left or whether you’re at the point where replacement is the cheaper fix over ten years.
Trusted Brands We Service in Fullerton
We install and service all major roofing manufacturers, and we stock local inventory in the Fullerton market so material lead times don’t drag your project out. For architectural shingle replacements, we install Atlas, Tamko, and GAF systems regularly. For premium jobs on hillside WUI homes, we work with GAF’s Class A assemblies and Boral’s fire-rated profiles. The point is you get options: value-tier Atlas or Tamko when budget drives the decision, premium GAF or Boral when fire rating and longevity do. Seven brands, one honest recommendation.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Fullerton Homes
- Skip-sheathing under original wood shake: Downtown and college-area bungalows from the 1910s to 1930s frequently have spaced-board decking that can’t take modern shingles or underlayment. A simple tear-off becomes a full redeck, and a bid that didn’t scope for that isn’t a real bid.
- Santa Ana UV curling on aging shingles: Fullerton’s hot, dry inland climate bakes asphalt shingles for years. By the time we’re called, mid-century tract roofs often show widespread curling, granule loss, and cracking along the eaves and south-facing slopes.
- Wind-driven ember exposure on hillside WUI roofs: Homes north of Chapman toward Coyote Hills sit in a fire-prone zone where fall Santa Anas push embers into ridge vents, soffit gaps, and penetration flashings. Code-compliant replacement requires ember-resistant vents and sealed details, not just new shingles.
- Thin flashing and standard galvanized hardware failing early: Inland-spec flashing and fasteners corrode under Fullerton’s heat cycling and UV. We spec hot-dip galvanized flashing and stainless or hot-dip fasteners on every replacement, because the cheap spec costs more within a decade.
Pricing for Roof Replacement in Fullerton, CA
Here are honest Fullerton market ranges. A standard architectural shingle reroof on a plywood-decked tract home runs $11,000 to $18,000. The same job on a downtown bungalow with skip-sheathing, which requires full redecking, runs $16,000 to $24,500. Flat roof replacement runs $7,500 to $15,000. Hillside WUI homes with Class A fire-rated assemblies and ember-resistant vents add $4,000 to $8,000 over flatland pricing. What changes the number: deck condition, pitch, tear-off layers, fire-zone compliance, and whether you choose Atlas, Tamko, GAF, or Boral materials. We give written line-item quotes so you see exactly where the money goes. Call (866) 217-3967 to schedule your free estimate.
We Also Serve Cities Near Fullerton
Beyond Fullerton, our Roof Replacement crew covers Anaheim, La Habra, Placentia, and La Habra Heights. If you’re in a neighboring city and dealing with the same Santa Ana UV, WUI fire-zone requirements, or aging mid-century roof stock, the same honest scoping and multi-brand material approach applies. One call covers the whole area.
Serving Fullerton, CA — Our Local Coverage Area
We’re based in the Fullerton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Fullerton
Because Fullerton’s hillside homes north of Chapman sit inside a Chapter 7A wildland-urban-interface zone, which means the roof assembly has to be Class A fire-rated: ember-resistant vents, fire-rated underlayment, and sealed soffit-to-fascia transitions. Standard flatland re-roofs don’t carry those requirements. The materials and the labor involved run $4,000 to $8,000 more depending on the house. Call (866) 217-3967 and we’ll scope your specific roof against the code as it applies to your address.
In most cases, yes. The 1910s through 1930s homes around downtown, the president-home districts, and the college area were built on skip-sheathing, spaced boards with gaps between them. Modern underlayments and shingles can’t be fastened to that. We tore off a failing wood-shake roof on a 1920s Spanish bungalow near the college and found exactly that: original spaced boards, no solid decking. The job became a full redeck with new plywood, a fire-rated underlayment, ice and water shield in the valleys, and a Class A architectural shingle assembly, all tied off with new drip edge and ember-resistant vents. Your inspection will tell us whether you’re looking at full redeck or a straight tear-off.
We use hot-dip galvanized flashing at every penetration, chimney base, valley, and edge detail, plus stainless or hot-dip fasteners throughout. Standard galvanized nails and thin flashing fail within a decade under Fullerton’s heat cycling and dry-season UV. Up on a Raymond Hill ridgeline re-roof, we spec’d the full Class A stack plus hot-dip flashing at every penetration and sealed soffit-to-fascia joints so wind-driven embers in fall fire weather have nothing to catch. The coastal-spec version of the job costs more upfront and costs less over time.
Line them up line-by-line: decking scope, underlayment type, shingle brand and grade, flashing material, vent type, and fire-zone compliance if you’re north of Chapman. A low bid on a downtown bungalow that doesn’t include redecking over skip-sheathing isn’t a comparable bid, it’s an incomplete one. Ask each contractor to name the brand they’ll install and whether it’s a Class A assembly. If one bid is $9,000 and the other is $18,000, the difference is almost always in the details the cheap bid left out. We’ll show you ours item by item, free.
Yes. Fullerton sits inland enough that the marine layer rarely reaches us in fall. What we get instead is hot, dry Santa Ana wind off the canyons and Coyote Hills, plus decades of direct UV on asphalt shingles. The wind drives embers into gaps on hillside roofs. The UV curls and cracks shingles across the flatland tracts. Coastal Orange County roofs deal with moisture and moss. Fullerton roofs deal with heat, wind, and fire exposure. The replacement spec has to reflect that or the next roof fails for the same reasons the old one did. Call (866) 217-3967 for a free estimate and we’ll walk your roof with you.
Written by Ruben Ibarra, Owner at Moreno Valley Roof Repair, serving Fullerton since day one.